Do You Have Questions?

A: Rock wool is a non-combustible mineral fiber insulation produced by melting natural basalt and spinning it into fibers.

A: Superior fire performance (A1), consistent density, low thermal conductivity, excellent acoustic absorption, and long service life.

A: Yes. Rock wool is classified as A1 non-combustible and does not contribute to fire spread or smoke generation.

A: Rock wool maintains stable performance for the lifetime of the building or equipment

A: No. Rock wool is inorganic and does not provide nutrient support for mold or bacteria.

A: Yes. It is made from natural stone, recyclable, and contributes to energy savings and low-carbon buildings.

A: Building façades, roofing, industrial equipment, pipelines, marine fire protection, acoustics, and hydroponic substrates.

A: Typically between 0.034–0.040 W/(m·K), depending on product type and density.

A: Yes. Industrial rock wool products withstand high temperatures depending on the binder-free content and density.

A: Keep in a dry, ventilated place; avoid compression and prolonged exposure to rain.

A: Use a serrated insulation knife for clean and accurate cuts.

A: Yes. Proper protective gear such as gloves and long sleeves is recommended to avoid mechanical irritation.

A: No. It is dimensionally stable under temperature and humidity variations.

A: Yes. Its open-fiber structure provides excellent sound absorption and noise reduction.

A: Yes. Custom densities, thicknesses, and panel sizes are available.

Decorative Wall Panels is an innovative wall panel system for wetroom applications, such as bath or shower walls, wall cladding, backsplashes, bath panels and more.

Our revolutionary waterproof paneling system transforms bathrooms quicker and easier for a luxe look that’s less expensive (and stays beautiful longer) than tile.

Core material is made from basalt. Top layer is finished with a high-performance decorative coating. Our Tile Collection is made from a completely waterproof composite material, creating the tile look but with no need for grout.

Single walls, corners, and alcove baths/showers, decorative wall covering, window cills and niches.

Where do we begin? Tile is heavy and brittle. It’s porous, letting in moisture which leads to mold and mildew. It scratches and scuffs. And, because it requires grout, it’s difficult to clean and even harder to install. Decorative Wall Panels, on the other hand, is waterproof, resists mold, cleans up easily and can be installed in a snap. And with simple prep, Decorative Wall Panels can be adhered right over existing tile.

All of our design collections feature marble, stone, wood and abstract prints. That is suited for both residential and commercial applications.

3050 x 1220 T&G

Installing a new Decorative Wall Panels tub or Shower Surround system takes approximately 2.5 hours from start to finish.

Our tongue-and-groove panels fit and lock into existing spaces to quickly go over various substrates — gypsum (sheetrock), plasterboard, greenboard, fiberboard, cement or concrete board, plaster and of course, even tile.

Yes, Decorative Wall Panels panels are easily cut to finish the look around windows and niches.

Decorative Wall Panels panels come in Tongue edge, Groove edge, Flat edge and Post-formed edge configurations.

Our panels are 8mm or 6mm thick.

You’ll need a pencil, tape measure, drill, heavy-duty caulking gun, hole saw, level circular saw with a fine tooth blade, square chalk-line, heavy-duty suction cups, router, methylated spirit alcohol and wooden shims.

Yes, Decorative Wall Panels panels are easily cut to allow for the installation of shower heads, bath spouts, handles and grab bars. And it’s simple to complete the look with a niche or corner shelf.

Yes. Decorative Wall Panels panels are lightweight making it easy for one person to handle and install them.